Outback-power-systems GS8048 Operator Manual Instrukcja Użytkownika Pobierz pdf (Strona 31)

Operation

900-0020-01-00 Rev B 29

Figure 8 GS8048 Power Save Priority

Forcing Specific Slaves to be Active:

It is possible to raise the priority of a slave and force it to activate. This is done by setting the master

rank higher than that slave. However, the

Master Power Save Level

scale is not the same as the

Slave

level.

Slave

level settings apply to the whole inverter.

Master

level settings are applied per module.

This means that increasing the master by one rank will only turn on one additional module. To

completely turn on a slave inverter, the master must be increased two ranks. See the next page.

In Table 2, instead of loads, the number on the far left of each line shows the master increased by one

rank. (This example is otherwise the same as Figure 8.)

The last line of the table shows the master increased to 3, which is the same as the rank of the highest

slave. However, this only activates the first of the three slaves. The master would need to be set to

rank 7 to activate all slaves.

Table 2 Changing Master Power Save Levels (GS8048)

Master Slave 1 Slave 2 Slave 3

Power

Save

Module

Power

Save

Module

Power

Save

Module

Power

Save

Module

On Off

Off Off

On On

Off Off

On On

On Off

Off Off

On On

Off Off

Minimal Load On Off Off Off Off Off Off Off

approx. 2.5 kW (12 Aac) On On Off Off Off Off Off Off

approx. 5 kW (24 Aac) On On On Off Off Off Off Off

approx. 7 to 8 kW (36 Aac) On On On On Off Off Off Off

Module 1 Module 2

Module 3 Module 4

Module 7 Module 8

Module 5 Module 6

Master

Master Power Save = 0

Slave 1

Slave Power Save = 1

Slave 2

Slave Power Save = 2

Slave 3

Slave Power Save = 3

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 59 60

Komentarze do niniejszej Instrukcji

Brak uwag

Outback-power-systems GS8048 Operator Manual Instrukcja Użytkownika Strona 31

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Zasilacze Outback-power-systems GS8048 Operator Manual