Outback-power-systems FLEXnet DC Users Guide Instrukcja Użytkownika Pobierz pdf (Strona 20)

The second METER screen shows the accumulated amp hours

and kilowatt hours for each shunt. Press the <DOWN> soft

key to view the next METER screen.

This screen shows the number of removed amp hours and

watt hours as measured by SHUNT A. Press the <DOWN>

soft key to view the SHUNT A charged screen.

The fourth meter screen displays the number of charged amp

hours and watt hours as measured by SHUNT A. Press the

<DOWN> soft key to view the  rst SHUNT B METER screen.

Pressing the <DOWN> soft key brings up the SHUNT B

charged screen.

Pressing the <DOWN> soft key brings up the  rst SHUNT C

METER screen.

METER/DC/SHUNT B

charged

AH 0kWH

DOWN UP TOP

METER/DC/SHUNT B

removed

AH 0kWH

DOWN UP TOP

METER/DC/SHUNT A

charged

12AH 0.160kWH

DOWN UP TOP

METER/DC/SHUNT A

removed

12AH 0.030kWH

DOWN UP TOP

A: -1AH 0.100kWH

B: 0AH 0.000kWH

C: 0AH 0.O00kWH

DOWN UP TOP

The  rst METER screen shows the amount of instantaneous

current running through each shunt. A positive value

indicates current  ow into the battery; a negative value

means a load is being supplied. Press the <DOWN> soft key

to view the AH and kWH (amp hour and watt hour) screen.

A: 0.1A 0.000 kW

B: 0.0A 0.000 kW

C: 0.0A 0.000 kW

DOWN STATUS

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 33 34

Brak uwag

Outback-power-systems FLEXnet DC Users Guide Instrukcja Użytkownika Strona 20